Featured Projects.
Measurement, design, and manufacturing references successfully completed for various industries.
CASE STUDIES
CAD Modeling from Sample
A plastic component needed to be re-manufactured, but no technical drawing or CAD data existed. Only the physical part was available as a reference.
The part was digitized with a 3D scanner to generate a point cloud. A production-ready STEP CAD model was built from the scan data using surface modeling.
A dimensionally accurate CAD model that matched the physical part was delivered, ready for tooling review.
Mold Revision
Parts produced from an existing mold showed dimensional inconsistencies during assembly. The source of the deviation within the mold cavity could not be identified by visual inspection alone.
The mold was 3D-scanned and compared against the reference CAD data. Deviation analysis identified the affected regions, and a revision design output was prepared.
Production inconsistencies were resolved. Parts began measuring within specified tolerances after the revision was applied.
Dimensional Verification in Series Production
Assembly issues appeared during series production. Visual inspection could not reliably pinpoint which geometric regions were out of tolerance.
Produced parts were scanned and compared against the reference CAD model. A color deviation map and dimensional measurement report were generated.
Out-of-tolerance zones were identified and production parameters were updated accordingly. Assembly issues were eliminated.
How Your Project Progresses.
Every project starts with a technical evaluation. Scope is defined, engineering steps are executed in sequence, and output is delivered in the agreed format.
Technical Evaluation
Project requirements, part geometry, technical data, and objectives are assessed at the start of each project.
Scope Definition
Required engineering steps, delivery formats, and the project plan are defined on a per-project basis.
Engineering Execution
3D scanning, CAD modeling, mold design, or manufacturing steps are carried out according to the project plan.
Verification & Delivery
Output data is verified against technical requirements. Approved data is delivered in the agreed project format.
You can start the technical evaluation process regardless of what stage your project is at.
Evaluate Your ProjectExplore All Services
View the full range of 3D scanning, reverse engineering, mold design, and manufacturing services on our services page.
Let's Evaluate Your Project Together
Share your technical requirements and we'll prepare a solution plan tailored for you.