Quality Control / Measurement Support
Quality control support through 3D scanning, measurement comparison, and project-specific inspection needs.
Quality Control / Measurement Support
Quality control support through 3D scanning, measurement comparison, and project-specific inspection needs.
- 01Measurement and comparison support with a 3D scanner can be provided.
- 02A bespoke measurement / comparison report can be prepared on a project basis.
- 033D scanning and measurement / quality control support can also be evaluated for external projects.
- 04Report format and measurement scope must be clarified according to project needs.
- Part information to be measured
Material, dimensions, and measurement zones
- Reference technical drawing or model
2D drawing, 3D nominal, or tolerance table
- Critical measurement points
Functional and assembly-critical areas
- Report format expectation
Dimensional measurement report, conformance assessment
- Sample count and frequency
Single-part verification or periodic inspection
3D Scanning
Digitizing physical parts with red laser and blue laser 3D scanning technologies.
Reverse Engineering
Creating manufacturable CAD models from physical parts or 3D scan data.
Contract Plastic Injection Molding
Contract plastic injection molding for plastic parts according to project requirements.
Technical Consulting
Technical evaluation and improvement support for molds, production, materials, processes, and part design.
The permissible range of dimensional deviation. For plastic injection parts, general tolerances typically range from ±0.1 mm to ±0.5 mm, while tighter values may be applied in precision assembly zones.
Read Definition →Point CloudA data set produced by 3D scanning, consisting of millions of measurement points each carrying X-Y-Z coordinates. It forms the primary input for the reverse engineering process and is converted into a CAD model.
Read Definition →Frequently Asked Questions
- Which parts are suitable for 3D measurement?
- Parts made from metal, plastic, cast, and composite materials are suitable for 3D measurement. Part size, surface characteristics, and required accuracy level are assessed at the start of the project.
- What does a deviation analysis report include?
- A deviation analysis report contains dimensional deviations of the scanned part relative to the reference CAD model, displayed as a color map, along with critical measurement points and tolerance comparisons. Report format is defined by project requirements.
- Is recurring measurement service available during series production?
- Periodic dimensional verification and quality monitoring throughout series production can be planned on a project basis. Scope and frequency are discussed at the start of the project.
- What is the difference between CMM and 3D scanning measurement?
- CMM performs high-accuracy contact measurement at specific points, while 3D scanning converts the entire surface geometry into digital data. For complex and free-form geometries, 3D scanning provides more comprehensive deviation data.
- Is on-site measurement service possible?
- On-site 3D scanning and measurement service can be evaluated depending on part size and location conditions. This option is discussed at the start of the project.
Let's Evaluate Your Project Together
Share your technical requirements and we'll prepare a solution plan tailored for you.